151 GB/T 4257-1984 擴孔鉆技術條件 Core drills--Technical requirements

152 GB/T 4258-1984 60°、90°、120°直柄錐面锪鉆 Countersinks with parallel shanks for angles 60°90°and 120°inclusive

153 GB/T 4259-1984 錐面锪鉆技術條件 Countersinks--technical requirements

154 GB/T 4260-1984 帶導柱直柄平底锪鉆 Counterbores with parallel shanks and solid pilots

155 GB/T 4261-1984 帶可換導柱錐柄平底锪鉆 Counterbores with morse taper shanks and detachable pilots

156 GB/T 4262-1984 平底锪鉆技術條件 Counterbores--technical requirements

157 GB/T 4263-1984 帶導柱直柄90°錐面锪鉆 90°Countersinks with parallel shanks and solid pilots

158 GB/T 4264-1984 帶可換導柱錐柄90°錐面锪鉆 90°Countersinks with morse taper shanks and detachable pilots

159 GB/T 4265-1984 90°錐面锪鉆技術條件 90°Countersinks--technical requirements

160 GB/T 4266-1984 锪鉆用可換導柱 Detachable pilots for use with counterbores and countersinks

161 GB/T 4267-1984 直柄回轉工具用柄部直徑和傳動方頭尺寸 Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares

162 GB/T 4388-1995 呆扳手、梅花扳手、兩用扳手的型式 Types of open-end wrenches, box wrenches and combination wrenches

163 GB/T 4389-1995 螺釘與螺母的裝配工具 雙頭呆扳手、雙頭梅花扳手、兩用扳手頭部外形的最大尺寸 Assembly tool for screws and nuts-Openend double-head engineers wrenches, doublehead box wrenches and combination wrenches-Maximum outside dimensions of heads

164 GB/T 4390-1995 公制扳手開口和扳手孔的常用公差 Spanner gaps and sockets-Metric series-tolerances for general use

165 GB/T 4391-1995 雙頭扳手的對邊尺寸組配 Combinations of double-end wrenche gaps

166 GB/T 4392-1995 敲擊呆扳手和敲擊梅花扳手 Slugging open-end wrenches and slugging box wrenches

167 GB/T 4393-1995 呆扳手?梅花扳手、兩用扳手 技術規范 Open-end wrenches, box wrenches and combination wrenches-Technical specifications

168 GB/T 4676-1984 普通磨料取樣方法 Method for sampling of conventional abrasive grains

169 GB/T 4678.1-1984 壓鑄模零件 模塊 Die-cast die components--Mold plates

170 GB/T 4678.2-1984 壓鑄模零件 圓形鑲塊 Die-cast die components--Round insert blocks

171 GB/T 4678.3-1984 壓鑄模零件 矩形鑲塊 Die-cast die components--Rectangular insert blocks

172 GB/T 4678.4-1984 壓鑄模零件 A型導柱 Die-cast die components--Guide pins type A

173 GB/T 4678.5-1984 壓鑄模零件 B型導柱 Die-cast die components--Guide pins type B

174 GB/T 4678.6-1984 壓鑄模零件 A型導套 Die-cast die components--Guide bushings type A

175 GB/T 4678.7-1984 壓鑄模零件 B型導套 Die-cast die components--Guide bushings type B

176 GB/T 4678.8-1984 壓鑄模零件 推板 Die-cast die components--Ejector plates

177 GB/T 4678.9-1984 壓鑄模零件 推板導柱 Die-cast die components--Guide pins for ejector plate

178 GB/T 4678.10-1984 壓鑄模零件 推板導套 Die-cast die components--Guide bushings for ejector plate #p#分頁標題#e#

179 GB/T 4678.11-1984 壓鑄模零件 推桿 Die-cast die components--Ejector pins

180 GB/T 4678.12-1984 壓鑄模零件 復位桿 Die-cast die components--Return pins

181 GB/T 4678.13-1984 壓鑄模零件 推板墊圈 Die-cast die components--Ejector plate washers

182 GB/T 4678.14-1984 壓鑄模零件 限位釘 Die-cast die components--Stop pins

183 GB/T 4678.15-1984 壓鑄模零件 墊塊 Die-cast die components--Spacer blocks

184 GB/T 4679-1984 壓鑄模零件技術條件 Specification of the die-cast die components

185 GB/T 4755-1984 扭簧比較儀 Microkator

186 GB/T 5102-1985 漸開線花鍵拉刀技術條件 Broaches for involute spline technical specifications

187 GB/T 5103-1985 漸開線花鍵滾刀通用技術條件 The general technical specifications for involute splines hobs

188 GB/T 5104-1985 30°壓力角漸開線花鍵滾刀基本型式和尺寸 The basic types and dimensions of hobs for 30°pressure angle involute splines

189 GB/T 5105-1985 45°壓力角漸開線花鍵滾刀基本型式和尺寸 The basic types and dimensions of hobs for 45°pressure angle involute splines

190 GB/T 5106-1985 圓柱直齒漸開線花鍵量規 Gauges for straight cylindrical involute splines

191 GB/T 5305-1985 手工具包裝、標志、運輸與貯存 Packaging,marking,transportation and storage of hand tools

192 GB/T 5340-1985 可轉位立銑刀 Endmilling cutters with indexable inserts

193 GB/T 5341-1985 可轉位三面刃銑刀 Side and facemilling cutters with indexable inserts

194 GB/T 5342-1985 可轉位面銑刀 Facemilling cutters with indexable inserts

195 GB/T 5343.1-1993 可轉位車刀及刀夾型號表示規則 Turning toolholders and cartridges for indexable inserts--Designation

196 GB/T 5343.2-1993 可轉位車刀型式尺寸和技術條件 Turning tools with indexable inserts--Types,dimensions and technical specifications

197 GB/T 5344-1985 普通磨料微粉粒度沉降管測定方法 Sedimentation tube testing method of conventional abrasive microgrits

198 GB/T 5388-1985 鏈鋸 導板 Chain saw--Guide bar

199 GB/T 5389-1985 鏈鋸 鋸鏈 Chain saws--Saw chain

200 GB/T 5391-1985 油鋸 臺架試驗方法 Gasoline powered chain saws--Bench test methods